Africa Galvanized Iron Wire Welded Roll Mesh Welding Machine
Roll Mesh Welding Machine Description
This machine is roll mesh welding machine.Usually, the diameter of
this kind of roll mesh is relatively thin.The mesh size can be
1/2",1",1/4",etc.The mesh size of the machine is not adjusted
casually, but it can be adjusted in multiple ways.The welding of
the machine is controlled by its cabinet.Workers only need to press
the button,the machine will weld automatically.There are counter in
the cabinet,workers need to set the length of the mesh in
advance.When the machine reaches the length,the machine will stop
automatically.The worker can cut off the mesh with electric
cutter,tied it and unload it.
Roll Mesh Welding Machine Technology
The welding machine belongs to resistance welding.There are
integrated circuit board to control thyristor,then the thyristor
can control the welding current of the machine.Different wire
diameter can use different welding current to reach best welding
effect.The welding speed of the machine can be adjusted according
to the order quantity, and the welding speed can be fast or
slow.The burr on both sides can be trimmed while welding,so the two
sides of the mesh are neat and beautiful.
Roll Mesh Welding Machine Advantage
1. The upper and lower electrodes are made of high chromium
copper.This material is in good conductivity,wear resistance and
long service life.
2. The whole frame is made of steel plate by laser cutting.
Accurate size, no heat distortion.
3. The warp wire and weft wire feeding are in wire coils.This
greatly reduces the amount of labor of workers.
4. Welding is fully automatic. After one time welding, all the
solder joints on the weft are welded
Roll Mesh Welding Machine
Control Cabinet:This is the heart of the machine.It can control the
welding current and speed of the machine.
Counter:This can calculate the length of the mesh.Once the welding
machine reaches the length preset,the machine will stop
automatically.
Welding Transformer: It is made of pure copper. The welding current
can be adjusted by current gear.
Loading of the machine
Finished Mesh
