Reinforcing Welded Mesh For Paving Reinforcing Mesh Welding Machine
Reinforcing Mesh Welding Machine Description
Reinforcing mesh welding machine is complete equipment for welding
reinforcing mesh,which is manufacturer by our company based on
learning foreign advanced experience and advanced technologies in
additional actual production demands in the international
market.This series equipment can perform high quality cross welding
for hot rolled ribbed rebar,cold rolled rebar and round bar.
Reinforcing Mesh Welding Machine Technology
1. This machine cent-control and welding time are composed of PLC
program system . The input front-panel has two forms, touch screen
and keyboard that makes the machine more intelligent and reasonable
and it could press at one time, separate welding. Surely,if the
power supply is enough big,it can also adopt the welding at the
same time.
2. Line wires adopt per-cut wires,line wires are put by hand based
on the positioning device,then automatic tightening and send the
down electrodes by sending line wires car installed with the step
motor; When the mesh is being welded, line wires of the next mesh
can be placed, which greatly shortens the working interval time of
the machine.
3. Cross wires also adopt pre-cut wires,the cross wire hopper
obtains wires by motor driver devices, electric magnetic increase
feeding device auto-feeding the wefts into the preparation area of
the device from the large storing hopper(storage up to 1000kg),it
is installed in the removable pulling mesh rack,very convenient to
adjust and maintain.
4. Our transformers adopts big power at 200KVA every one,which can
ensure the welding quality in good condition and adopt water
cooling system,so the machine can work for 24 hours continuously.
5. Pulling mesh way adapts servo motor back and forward according
to the setting parameters into the touch screen.
Reinforcing Mesh Welding Machine Parameter
| Wire diameter | 6.0-12.0mm | Warp wire | Pre-cut wire |
| Weft spacing | 100-200mm | Weft wire | Pre-cut wire |
| Warp spacing | 100-200mm | Rated voltage | 380V ( customized ) |
| Width | 3000mm | Rated power | 200KVA*15 |
| Welding speed | 60-70 times/min | Motor | 11KW |
| Welding spots | 30 pieces | Weight | 9.0T |
Products & Application
Products such as coal mine supporting mesh, wire mesh fence,
high-rise building steel bridges mesh, reinforcing mesh applied in
construction, road and so on.
