Stainless Steel Mesh Corrosion Resistance Welded Wire Mesh Machine
Welded Wire Mesh Machine Description
Welded Wire Mesh Machine is also called wire mesh making machine.It
can weld stainless steel wire,galvanized wire,black wire,etc.The
machine belongs to resistance welding machine.It has a very low
power consumption, so the production cost is low.The welded wire
mesh machine has control cabinet.The worker only need to press the
button,then the machine will run automatically.
Welded Wire Mesh Machine Technology
The circuit is closed, so that the entire closed circuit and the
current are equal; but the resistances are different everywhere,
especially where the resistance is the largest at the unfixed
contact. This resistance is called contact resistance in physics.
According to the law of thermal effect of current (also called
Joule's law), Q=I^2;×Rt shows that if the current is equal, the
greater the resistance, the higher the heat, and the stigma
resistance is the largest during electric welding. The electric
heating is naturally the most. When the stigma presses the
transverse and longitudinal diameters together, a lot of heat is
released, which makes the transverse and longitudinal diameters
melt and bond instantly.
Welded Wire Mesh Machine Advantage
1. The mesh roll length can be set on the counter switch in the
control panel.
2. The welding transformers have 8 degree.It can be adjusted for
different wire diameter welding.
3. The welding time and welding current can be changed by the
electric cabinet to guarantee welding solid.
4. The raw material is suitable for black wire, galvanized wire or
stainless steel wire.
5. The cutter both in the middle and on the two sides can be
adjusted randomly. So the machine can make two roll mesh at the
same time.
Welded Wire Mesh Machine Counter
The counter can calculate the length of the mesh roll. Set the
length of the mesh to be welded in advance. When the preset length
is reached, the machine will stop automatically.
